Opens in a new tab

TESTING CENTER FOR
ROPES AND LIFTING
ACCESSORIES

TESTING EXPERTISE –
FROM STANDARDROPE-
TESTING TO CUSTOMIZED
SPECIAL TESTS

Prüfstand für Scheibenbiegeversuche mit zwei Seilscheiben

ENGINEERING REPORTS
BEYOND INDUSTRY
STANDARDS

YOUR ADVANTAGES

Precise data as the foundation for your business.
Independent. For all manufacturer brands.

  • Engineering reports that go beyond conventional test reports and exceed industry standards
  • Destructive and non-destructive testing methods
  • Comprehensive failure investigations
  • Extensive testing capabilities with World-Class Test Facilities
  • On-site testing services available
  • Fast and straightforward project execution combined with competitive costs compared to public institutions
  • For specialized requirements, we collaborate with the most renowned universities and research institutions in our industry

Our testing center combines state-of-the-art testing technology with decades of manufacturer and development expertise.
From standards-compliant testing to customized special test programs, we develop testing solutions for wire ropes and fiber ropes under realistic operating conditions.

FAILURE
ANALYSIS

Beschädigte Drahtseile mit gebrochenen Drähten

FAST
ANSWERS
TO YOUR
QUESTIONS

Bruchflächen einzelner Drähte in Nahaufnahme
We inspect wire ropes, hybrid ropes, specialty wire ropes, fine wire ropes, fiber ropes, and lifting accessories.

Our failure analysis services help you systematically identify the root causes of wear, wire breaks, or premature rope failure. By combining practical manufacturer expertise, materials analysis, and realistic operational assessment, we identify critical influencing factors at an early stage and develop targeted measures to optimize operational safety, service life, and equipment availability.


SERVICE LIFE AND DISCARD CRITERIA

FOR MAXIMUM PLANNING RELIABILITY

Through our service life testing and rope system design assessments in accordance with DIN ISO 16625 (formerly DIN EN 13001), we analyze the behavior of wire ropes, fiber ropes, and sheaves under realistic operating conditions and provide reliable service life predictions.

Using targeted bending fatigue, wear, and load testing, we evaluate the durability, fatigue behavior, and safety margins of your products. The resulting insights provide a reliable foundation for optimization, quality assurance, and the development of long-lasting rope solutions.

We offer:

  • Service life analyses and predictions
  • Limit-state concepts
  • Testing under critical D/d ratios (bending radii)
  • Discard criteria assessments, e.g. in accordance with ISO 4309, ISO 4308, and similar standards
  • Evaluation of the influence of the combination and arrangement of plastic and steel sheaves on the service life of wire ropes

EU MACHINERY
REGULATION

Drahtseil mit Kausche auf Betonboden
Warnzeichen

WE SUPPORT
YOU
IN ITS
IMPLEMENTATION

THE EU MACHINERY REGULATION (EU) 2023/1230 APPLIES FROM 20 JANUARY 2027 AND REPLACES THE PREVIOUS MACHINERY DIRECTIVE 2006/42/EC.

The new regulation has a direct impact on the manufacture and use of running ropes, even though ropes themselves are not considered "machines". The decisive factor is how they are used, particularly as safety-relevant components within machinery and equipment.

We support you in the professional implementation of the Machinery Regulation.

Very important!
The regulation affects both rope manufacturers and operators of rope-driven systems. In addition, the transition period for CE certification will come to an end. As a result, action may be required to ensure the future conformity of products and installations.

If an operator makes substantial modifications to a rope system, such as:

  • Higher loads
  • Modified rope routing
  • Changed end terminations
  • New drive technology
  • Automated control systems this may be considered a design modification.

kann dies als konstruktive Abweichung gelten.

As a result, the party making the modification may legally be treated similarly to a new manufacturer and may be required to:

  • Perform a new risk assessment
  • Reassess conformity
  • Issue a new CE marking, where applicable

Conformity Assessment Procedures
As your technical partner, we help ensure compliance. We prepare customized evidence packages for you, including documentation for risk assessments, CE compliance documentation, and evaluations of "substantial modifications" to existing equipment and installations.

OUR
TESTING PROCESS

OUR TESTING PROCESS FOR ROPES AND LIFTING ACCESSORIES IS STRUCTURED AND BASED ON RECOGNIZED STANDARDS TO ENSURE SAFETY, RELIABILITY, AND TRACEABILITY AT ALL TIMES.

From incoming inspection through to final evaluation, every step is documented and carried out in a transparent and traceable manner.

Visual Inspection and Incoming Inspection

Registration of the test specimen and inspection for external damage, irregularities, markings, and completeness.

Identification and Documentation

Clear identification of the test specimen and recording of all relevant technical and operational information to ensure full traceability.

Testing Procedure

Non-Destructive Testing / Destructive Testing:
Selection of appropriate testing methods based on the test objective, application, and applicable standards. Execution of non-destructive and/or destructive testing procedures to assess the condition and performance of the test specimen.

Evaluation of Test Results

Professional evaluation of test results against applicable standards, specifications, limit values, and application-specific requirements.

Documentation and Test Report

Preparation of a fully traceable test report including results, evaluation, and recommendations for the continued use of the test specimen.

LIFTING ACCESSORY
INSPECTION

Schäkel und Drahtseil-Anschlagmittel

OUR TESTS
COMPLIANT WITH
APPLICABLE
STANDARDS AND
DGUV REQUIREMENTS.

WE PROVIDE PROFESSIONAL AND STANDARDS-COMPLIANT INSPECTION OF LIFTING ACCESSORIES SUCH AS HOOKS, ROPE AND ROPE SYSTEMS, WEBBING SLINGS, AND ANCHOR POINTS.

We inspect for wear, deformation, cracks, corrosion, and other safety-relevant defects..
All inspection results are documented in a transparent and traceable manner and recorded in detailed inspection reports. Where safety-relevant defects are identified, a clear assessment is provided together with recommendations for withdrawal from service where appropriate.

As a result, we can support and complement your internal DGUV-appointed inspection representatives whenever required.

TESTING METHODS –
WORLD-CLASS
TEST FACILITIES

WE OFFER A COMPREHENSIVE RANGE OF MATERIAL AND QUALITY TESTING SERVICES FROM A SINGLE SOURCE – INCLUDING BOTH NON-DESTRUCTIVE AND DESTRUCTIVE TESTING METHODS.

By utilizing state-of-the-art testing equipment and internationally recognized testing standards, we ensure reliable condition assessments and support operators in complying with regulatory requirements while maintaining the operational safety of their equipment and installations.

DESTRUCTIVE
TESTING METHODS

Horizontalzugprüfmaschine 2500 kN mit eingespanntem Seil
Vertikalzugprüfmaschine im Prüflabor
Gerissenes Drahtseil nach dem Zugversuch

Tensile testing

  • Horizontal tensile testing machine 2500 kN
  • Vertical tensile testing machine 300 kN*
  • Vertical tensile testing machine 50 kN*
  • Vertical tensile testing machine 5 kN*

* Including optical strain measurement

Zugschwellprüfmaschine 210 kN
Prüfhalle mit Zugschwellprüfmaschine

Pulsating Tensile Testing

  • Pulsating tensile testing machine 210 kN*

* Including optical strain measurement

Mehrzonen-Biegeermüdungsprüfmaschine
Biegeermüdungsprüfmaschine mit Schutzgitter

Bending Fatigue Testing

  • Multi-zone bending fatigue testing machine 198 kN
  • Multi-zone bending fatigue testing machine 50 kN
  • Single-zone bending fatigue testing machine 2 kN
  • Reverse bending fatigue testing machine (OTIS standard) 7 kN
Drehwinkel- und Drehmomentprüfmaschine
Prüfturm für Drehwinkelversuche mit zwei Mitarbeitern

Angle of Rotation / Torque Testing

  • Rotation and Torque testing machine 300 kN*, 1500 Nm*

*Including optical strain measurement and diameter reduction measurement

Torsionsprüfung an einem eingespannten Einzeldraht
Prüfgerät für Einzeldrähte

Single Wire Testing

  • Tensile testing
  • Torsion testing
  • Reverse bend testing
  • Rotating bending wire testing
Seilproben und Endverbindungen nach der Korrosionsprüfung

Environmental and Corrosion Testing

  • Salt spray testing
  • Corrosion resistance testing
  • Zinc coating determination
  • Environmental simulations
Eigenentwickelter Prüfstand mit Seilscheibe

In-House Development of Testing Machines

  • Concept development and design of customized test rigs
  • Automated testing procedures and data evaluation
  • Development of specialized solutions for rope-engineering testing applications

NON-DESTRUCTIVE
TESTING METHODS

Arbeitsplatz für visuelle Inspektion mit digitalem Mikroskop

Visual Inspection

  • Visual rope inspection in accordance with ISO 4309
  • Digital microscopy
  • Scanning electron microscopy (SEM)
  • Damage pattern analysis
Kamera für die optische Dehnungsmessung

Strain Measurement

  • Optical strain measurement
  • Local and global strain analysis
  • Load-dependent deformation measurement
  • Validation of calculation models
Härteprüfung an einer Seilscheibe

Surface Analysis

  • Hardness testing
Laborgläser für die Beschichtungsanalyse

Coating Analysis

  • Gravimetric zinc coating determination
  • Gas volumetric zinc coating determination

MORE ABOUT OUR KNOW-HOW

Discover more about our expertise and many years of experience in the development and application of technical solutions.

Benefit from in-depth technical knowledge that continues to evolve through ongoing research and practical experience.